Product Info: |
Stretch wrapmachine
Technology description of the equipment:
1. machine parameters:
Max. packing weight |
2000kg |
Max. packing height |
2000mm |
Turntable size |
Φ1500mm |
Turntable height |
90mm |
Turntable speed |
Adjustable |
Film lifting speed |
3M/Min |
Power supply |
380V/50HZ |
Turntable motor power |
0.37Kw |
Lifting motor power |
0.37KW |
Film Paper Core Radius |
76mm |
dimension |
2500mm*1500mm*2510mm |
weight |
750kg |
2. List of Equipments Nam eproducing area or brand Transducer SAHCH PLC Korea LG Text Display German siemens Photo-electricity Korea AUTONICS Turntable Motor Taiwan TUNGLEE Lifter Motor Taiwan ZIGUANG Button French Schneider Bracket Roller Japan Rough Rubber Holland Stroke Switch Taiwan TEND Korea LG French Schneider Proximity Switch Korea AUTONICS Note: Because of gradual innovation of the machine, above-mentioned may change without any notification. 3. electric control system of wrapper It adopts independent electric cabinet controlling, the cabinet is at the outer of the machine which has centralized control. There are air switch, relay, AC Proximity Switch, press buttom and indicator light, etc. the switches are Schneider, this machine has 2 phases and 3 wires, it can be connected to ground. It has power control cabinet and adopts standard wire duct cover. The whole wire requires the wires are in good order, clear, control switches and press buttom indicator light has obvious mark, the electria and controlling cabinets’ design, production and installation are accord with national electric technology safety standard. All of the wire appliances and devices during working, their temperature rising shall not over standard products’ rating, the switches also have over loading protection. A, the equipments should have safe loop protection B. the pipe wire should have enough protection as well as reliable and fixed. C. the cables should have enough capacity and anti-press. D. all of the parts can be connected to the ground. 1. supply power: 380V 50HZ 2. power consumption: approx 1kw 3. no heavy vibration at the scene, environment temp: –10℃~+40℃ running test and check before shipping: Before shipping, the supplier would test and run the machine in the supplier’s company according to contract requirements. 4. Some manufacture standards for the system equipments GB8196 Light Industrial Machinery Equipment Protection security GB3805 Light Industry Machinery Safety Extra Low Voltage GB3829 Light Industry Machinery creepage Protection GB5083Light Industry Machinery Environmental Protection GB7311-87 machine model organization methodology GB / T 7932-1987 General technical requirements HG 20532-93 Mechanical Engineering Design Safety and health regulations JB 7233-94Mechanical safety requirements QB / T 1586.1-93Light Industry Machinery general technical requirements for welding pieces QB / T 1586.2-93 Light Industry Machinery General technical requirements for cutting QB / T 1586.3-93 Light Industry Machinery general technical conditions for assembly QB / T 1586.4-93 Light Industry Machinery general technical conditions for painting Noise degree should be up to the requirements of the national industrial equipments. The design, manufacture,inspection and test etc should meet with the requirements of the National standard, criterion and some other relevant regulations. 5. Paint, symbol, packaging Each part of the equipments are fixed installed, as well as flat and straight, the parts keep their original colors. Rust on the steel material had been removed, with spray-paint treatment after putting oil on, which make the whole line looks nice and in good condition. Stoving varnish parts are painted by imported computer which make the paint flat and smooth. Besides Stoving varnish, other steel parts adopt flange and galvanized treatment. Noise should accord to national industrial equipments’ requirement. E. the equipements are in accord with national related general requiremens and workers safety health standard. F. paste warning sign on necessary places. |